JVC MX-JE31, GVT0145-001B manual ⁄ Front speakers, @ Surround speakers for MX-JE5

⁄Front speakers

•When connecting the speaker cords, match the polarity of the speaker terminals: (+) to (+) and (–) to (–).

MX-JE5

MAIN SPEAKERS

	CAUTION:
	SPEAKERS IMPEDANCE
	6Ω – 16Ω
	SURROUND SPEAKERS
	CAUTION:
	SPEAKERS IMPEDANCE
From right	16Ω –32Ω
	From left
front main speaker	front main speaker

MX-JE3/MX-JE31

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.

•DO NOT connect more than one speaker to each terminal.

• DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.

To remove the speaker grilles (for MX-JE5/MX- JE31)

Speaker grille

Holes Projection

The illustration above is for MX-JE5.

SPEAKERS
CAUTION:
SPEAKERS IMPEDANCE
6Ω –16Ω
From right front main	From left front main
speaker	speaker

•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

•The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers.

–When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers.

Then wait at least 30 minutes before turning on the TV’s main power switch again.

@Surround speakers (for MX-JE5)

•When connecting the speaker cords, match the polarity of the speaker terminals: (+) to (+) and (–) to (–).

MAIN SPEAKERS

CAUTION:

SPEAKERS IMPEDANCE

6Ω – 16Ω

SURROUND SPEAKERS

CAUTION:

SPEAKERS IMPEDANCE

16Ω –32Ω

From right surround From left surround

speakerspeaker

•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

5