Green light blinks when the image is hidden.
button again to display

ENGLISH

3Adjust image position (shift).

 

Lens control

 

 

LENS

Shift

 

 

 

Select

Back

 

 

Operate

BACK

Adjust accordingly by

 

 

 

 

 

 

pressing the up/down

 

 

 

buttons

●After adjusting the image position, it may be necessary to select “Pixel Adjust” from the Settings menu “Installation”.

(P38 - 23 )

● Every time the LENS button is pressed, the adjustment item will be switched among “Focus”, “Zoom” and “Shift”.

TIPSYou can hide the image temporarily

You can hide the image temporarily.

HIDE

● Press the HIDE

LENS

4To end

BACK

Focus Zoom Shift

image.

● The power cannot be turned off when the image is temporarily hidden.

5 Turn off the power

STAND BY

While a confirmation screen is displayed

STAND BY

STAND BY/ON

Blinking (Red Lamp)

Cool Down mode

STAND BY/ON

Light on (Red Lamp)

●When power off, the lens cover will be closed.

●The power cannot be turned off within approximately 90 seconds after it has been turned on. Start operation only after 90 seconds time.

●You can also press the button on the unit to turn off the power. (P13)

●Pull out the power plug when the unit will not be used for a prolonged time.

MEMOAbout Cool Down mode

●The Cool Down mode is a function to cool down the lamp for approximately 60 seconds after projection is complete. This function prevents the internal parts of the unit from deformation or damage due to overheating of the lamp. It also prevents lamp blowout and premature shortening of lamp life.

●During Cool Down mode, the [STANDBY/ ON] indicator blinks in red.

●After the Cool Down mode is complete, the unit automatically returns to standby mode.

●Do not pull out the power plug during Cool Down mode. This may shorten the lamp life and cause a malfunction.

Started Getting

Preparation

Operation Basic

Settings

Troubleshooting

Others

25