4 Settings

Setting Menu (Continued)

Input Signal > COMP.12COMP.

Configures the input signal for the component video input terminals.

 

Y Pb/Cb Pr/Cr

Select this when the component video signals are input.

Color Space

RGB

Select this when the RGB video signals are input.

 

SCART

Select this when RGB video signals and sync signals are

 

input via the SCART interface for European markets.

 

 

●The setting is available only if the component video terminals are selected.

Input Signal > Video/S-Video13 Video/S-Video

Configures the Video/S-Video input signals.

 

NTSC Setup Level

0IRE

Adjusts the gradation for signals without the 7.5 IRE setup.

 

7.5IRE

Adjusts the gradation for signals with the 7.5 IRE setup.

 

 

● Adjust this only when NTSC signals are input via Video or S-Video terminal.

 

 

 

 

 

 

Auto

Configures the color system automatically.

 

 

NTSC

Select this when the color system is NTSC.

 

 

NTSC4.43

Select this when the color system is NTSC4.43.

 

Color System

PAL

Select this when the color system is PAL.

 

 

PAL-M

Select this when the color system is PAL-M.

 

 

PAL-N

Select this when the color system is PAL-N.

 

 

SECAM

Select this when the color system is SECAM.

●The setting is available only when the Video or S-Video input image is projected.

Input Signal > PC

14 PC

Configures PC input.

 

Auto Alignment

Automatically adjusts “Tracking”, “Phase” and “Picture Position”.

 

Tracking

Adjust the horizontal size and display area of the image.

 

(This may vary depending on the signal, but does not usually require adjustment.)

 

 

 

Phase

Adjust flickering and blurred images.

 

(This may vary depending on the signal, but does not usually require adjustment.)

 

 

 

 

 

 

Picture Position

Adjust the display position of the image.

●This can be set only when selecting PC input terminal.

Input Signal > Picture Position15 Picture Position

Adjusts the horizontal/vertical position of the projected image.

●The position of the image varies depending on the input signals. The image of some signals may not be fully displayed. Adjust the position of image using this menu to display the image properly.

36