JVC RX-6500VBK manual Press Test again to stop the test tone, Press Effect to select an effect

English

4. Adjust the speaker output levels.

• To adjust the center speaker level, press

CNTR –/+ (from –10 dB to +10 dB).

• To adjust the left rear speaker level, press

REAR•L –/+ (from –10 dB to +10 dB).

• To adjust the right rear speaker level, press

CNTR

3 4

REAR•L

On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.

REAR•R –/+ (from –10 dB to +10 dB).

5 6

ENTER

REAR•R

7/P 8

1.Press DSP MODE repeatedly until “THEATER” appears on the display.

•The ÙPRO LOGIC and DSP indicators also light up on the display.

2.Adjust the speaker output levels.

DSP MODE

ADJUST

5. Press TEST again to stop the test tone.

TEST

1) Press ADJUST repeatedly until one of

the following indications appears on

the display.

“CENTER LEVEL”:

To adjust the center speaker level.

“REAR L LEVEL”:

To adjust the left rear speaker level.

“REAR R LEVEL”:

6. Press EFFECT to select an effect				EFFECT
level you want.				9
• Each time you press the button, the effect
level changes as follows:
DSP EFFECT 1	DSP EFFECT 2		DSP EFFECT 3
DSP EFFECT 5		DSP EFFECT 4

As the number increases, JVC Theater Surround becomes stronger.

	To adjust the right rear speaker level.
	• Once you have pressed ADJUST,
	MULTI CURSOR % / Þ can be also
	used for selecting the speaker.
2)	Press MULTI CURSOR @/ # to
	adjust the selected speaker output
	level (from –10 dB to +10 dB).
3)	Repeat 1) and 2) to adjust the other
	speaker output levels.

MULTI CURSOR

4.Adjust the effect level.

1)Press ADJUST repeatedly until “DSP EFFECT” appears on the display.

•Once you have pressed ADJUST, MULTI CURSOR % / Þ also can be used for selecting “DSP EFFECT.”

•The display changes to show the current setting.

ADJUST

MULTI CURSOR

2) Press MULTI CURSOR @/ #to select the effect level.

• As you press it, the effect level changes as follows:

DSP EFFECT 1DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5 DSP EFFECT 4

As the number increases, JVC Theater Surround becomes stronger.

24