JVC RX-6500VBK Connecting Audio/Video Components, English, Connecting the subwoofer speaker, Tv

Connecting the subwoofer speaker

You can enhance the bass by connecting a subwoofer. Connect the input jack of a powered subwoofer to the SUBWOOFER OUT jack on the rear panel, using a cable with RCA pin plugs (not supplied).

SUBWOOFER

OUT

Powered subwoofer

Connecting Audio/Video Components

You can connect the following audio/video components to this receiver. Refer also to the manuals supplied with your components.

Turntable
Turntable	To audio	PHONO
	output	CD
	ANTENNA
	FM 75
	COAXIAL	TV SOUND
		/DBS
		OUT
		(REC)
		VCR
	AM	IN
	LOOP	(PLAY)
	AM	OUT
	EXT
		(REC)

TAPE

/MD

IN

(PLAY)

If an earth cable is provided for your turntable, connect the cable to the terminal marked (H) of the ANTENNA terminals on the rear panel.

RIGHT LEFT

AUDIO

English

Audio Components	Video Components
• CD player*	• DVD player*
• Turntable	• TV
• Cassette deck	• DBS tuner*
or MD recorder*	• VCR

*You can connect these components using the methods described in “Analog connections” (below) or in “Digital connections” (see page 7).

Analog connections

Audio component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, and the red plug to the audio right jack.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

CD player

PHONO

CD player

CD

TV SOUND

/DBS

To audio output

OUT

(REC)

VCR

IN

(PLAY)

OUT

(REC)

TAPE

/MD

IN

(PLAY)

RIGHT LEFT

AUDIO

Note:

Any turntables incorporating a small-output cartridge such as an MC (moving-coil type) must be connected to this receiver through a commercial head amplifier or step-up transformer. Direct connection may result in insufficient volume.

Cassette deck or MD recorder
	Cassette deck
To audio input	PHONO	To audio output
	CD

TV SOUND

/DBS

OUT

(REC)

VCR

IN

(PLAY)

OUT

(REC)

TAPE

/MD

IN

(PLAY)

RIGHT LEFT

AUDIO

To audio input To audio output MD recorder

Note:

You can connect either a cassette deck or an MD recorder to the TAPE/MD jacks. When connecting an MD recorder to the TAPE/MD jacks, change the source name, which will be shown on the display when selected as the source, to “M D.” See page 11 for details.

If your audio components have a COMPU LINK-3 terminal

See also page 26 for detailed information about the connection and the COMPU LINK-3 remote control system.

5