JVC RX-668RBK manual Switching to a Broadcast Program of Your Choice Temporarily

Switching to a Broadcast Program of Your Choice Temporarily

Another convenient RDS service is called “EON (Enhanced Other Network).”

The EON indicator lights up while receiving a station with the EON code.

This allows the receiver to switch temporarily to a broadcast program of your choice (NEWS, TA, and/or INFO) from a different station except in the following cases:

•When you are listening to non-RDS stations (all AM — MW/LW and some FM stations).

•When the last received FM station is a non-RDS station.

•When the receiver is in standby mode.

Before you start, remember...

• The EON function is only applicable to preset stations only.

CASE 2	If there is a station broadcasting the program
	you have selected

The receiver changes the source (all sources except AM – MW/ LW), and tunes in the station. The indicator of received PTY code starts flashing.

Ô

When the program is over, the receiver goes back to the previously selected source, but still remains in EON standby mode. The indicator of received PTY code stops flashing and remains lit.

CASE 3	If the FM station you are listening to is
	broadcasting the program you have selected

English

On the front panel ONLY:

1. Press EON so that the last selected program type appears on the display.

EON

The receiver continues to receive the station, but the indicator of received PTY code starts flashing.

Ô

The receiver enters EON standby mode. When the receiver is in EON standby mode, the receiver is ready to receive the EON data (TA/NEWS/INFO) you select.

2. Press TA/NEWS/INFO until the	TA/NEWS/INFO
program type you want appears on
the display.

•Each time you press the button, the display changes to show the following:

TA NEWS/INFO TA/INFO TA/NEWS

NEWS INFO TA/NEWS/INFO

TA: Traffic Announcement in your area.

NEWS: News.

INFO: Program the purpose of which is to impart advice in the widest sense.

CASE 1	If there is no station broadcasting the program
	you have selected

The receiver continues playing the current source (all sources except AM – MW/LW).

Ô

When a station starts broadcasting the program you have selected, the receiver automatically switches to the station. The indicator of received PTY code starts flashing.

Ô

When the program is over, the receiver goes back to the previously selected source, but still remains in EON standby mode. The indicator of received PTY code stops flashing and remains lit.

When the program is over, the indicator of received PTY code stops flashing and remains lit, but the receiver remains in EON standby mode.

To stop listening to the program selected by EON

Press EON so that the program type (TA/NEWS/INFO) indicator goes off from the display. The receiver enters EON off mode and goes back to the previously selected source.

•Each time you press EON, the EON mode alternates between standby mode and off mode.

Notes:

•EON data sent from some stations may not be compatible with this receiver.

•In EON standby mode, if you change the source to AM (MW/LW) or if you carry out synchronized recording (see page 27), EON standby mode is canceled temporarily. The receiver goes back to EON standby mode again when you have finished that operation.

•While listening to a program tuned in by the EON function, you cannot use source selecting buttons and PTY SEARCH button.

•While listening to a program tuned in by the EON function, you cannot perform the on-screen operations (pages 23 and 29).

CAUTION:

When the source alternates intermittently between the station tuned in by the EON function and the currently selected source, press EON to cancel the EON function.

If you do not press the button, the currently tuned station is received finally, and the indication of the EON program type flashing on the display disappears.

16