JVC RX-668RBK manual Adjusting the 3D-PHONIC Modes, Adjusting DAP Modes

English

Adjusting the 3D-PHONIC Modes

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 11).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Adjusting DAP Modes

Before you start, remember...

• Make sure that you have set the speaker information correctly

(see page 11).

• There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 1 again.

• You can only adjust the rear speaker output level when you have

On the front panel:

1. Press SURROUND repeatedly until “3D ACTION” or “3D THEATER,” appears on the display.

SURROUND

connected the rear speakers and have set “REAR SPK” to “YES.”

See page 11.

On the front panel:
1. Press SURROUND repeatedly	SURROUND
until the DAP mode — LIVE

The 3D-PHONIC, DSP, PRO LOGIC and the selected 3D- PHONIC mode indicators also light up on the display.

2. Press ADJUST so that the cursor	ADJUST
control %/ Þ/ @/ #buttons work

CLUB, DANCE CLUB, HALL, or

PAVILION — appears on the

display.

The DSP and the selected DAP mode indicators also light up on

for adjusting the surround setting.

3. Press cursor control % / Þ repeatedly until “DSP EFFECT” appears on the display.

4. Press cursor control @/ #to select an effect level you want.

• Each time you press the button, the effect level changes as follows:

DSP EFFECT 1DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5	DSP EFFECT 4
As the number increases, the selected 3D-PHONIC mode
becomes stronger.

the display.

2. Press ADJUST so that the cursor control % / Þ/ @/ #buttons work for adjusting the DSP setting.

3. Press cursor control %/ Þ repeatedly until “REAR LEVEL” appears on the display.

4. Press cursor control @/ #to adjust the rear speaker output level (from –10 to +10).

Note:

ADJUST

From the remote control:	SOUND
	CONTROL

1. Press SOUND CONTROL.

The 10 keys are activated for sound adjustments.

2. Press SURROUND repeatedly	SURROUND
until “3D ACTION” or “3D	3
THEATER” appears on the
display.

The 3D-PHONIC, DSP, PRO LOGIC and the selected 3D- PHONIC mode indicators also light up on the display.

3. Press EFFECT to select an effect	EFFECT
level you want.	4

•Each time you press the button, the effect level changes as follows:

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5 DSP EFFECT 4

As the number increases, the selected 3D-PHONIC mode becomes stronger.

You cannot adjust the left and right rear speaker output levels

separately.

5. Press cursor control %/ Þ repeatedly until “DSP EFFECT” appears on the display.

6. Press cursor control @/ #to select an effect level you want.

• Each time you press the button, the effect level changes as follows:

DSP EFFECT 1DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5 DSP EFFECT 4

As the number increases, the selected DAP mode becomes stronger.

19