![](/images/new-backgrounds/1173562/17356287x1.webp)
Image Adjustment
Image Adjust
adjusts Contrast, Brightness, Color, Tint, Color management, Auto picture control, Color temp., Red, Green, Blue, Sharpness, Gamma, Noise reduction, Progressive, and Film; selects Reset and Store.
1 | Press the MENU button to display |
Menu icons with the Point buttons (7 and 8) or the Control | |
| pad and press the SELECT button when the IMAGE ADJ. |
| icon comes right in front. |
2 | Move the yellow frame pointer with the Point buttons (e |
| and d) or the Control pad to an item which you want to |
| adjust. |
3 | Press the SELECT button to display an adjustment dialog |
box. Adjust value with the Point buttons (e and d) or the |
Control pad.
Contrast
Decrease or increase contrast with the Point buttons (e and d) or the Control pad. (From 0 to 63.)
Brightness
Adjust image darker or brighter with the Point buttons (e and d) or the Control pad. (From 0 to 63.)
Color
Lighten or deeper color with the Point buttons (e and d) or the Control pad. (From 0 to 63.)
Tint
Adjust with the Point buttons (e and d) or the Control pad to obtain proper color. (From 0 to 63.)
Color management
The Color management function enables you to adjust color level, phase and gamma of the selected spot of the projected image and exchange the original color with the adjusted one.
The projector can store up to eight color management data.
Color selection
Press the SELECT button when Color management is highlighted and then Color management pointer will appear. Move the pointer to a spot which you want to adjust the color of with the Point buttons (e, d, 7, and 8) or the Control pad, and press the SELECT button. The image being projected freezes and Color Selection window will appear.
Select a level and phase which you prefer with the Point buttons (e, d, 7, and 8) or the Control pad and press the SELECT button to move the pointer to GAMMA.
Select a position of GAMMA which you prefer with the Point buttons (e and d) or the Control pad and press the SELECT button.
While adjusting COLOR and GAMMA, the projected image color will change accordingly.
✔Note:
•Color and Tint cannot be displayed when PC input source is selected.
•Tint cannot be adjusted when the video system is PAL, SECAM,
Image Adjust Menu
IMAGE ADJ. icon
Pointer (yellow frame)
Move the yellow frame pointer with the Point buttons (e and d) or the Control pad to an item which you want to adjust.
Indicates the other items exists below.
Item data
Adjust value with the Point buttons (e and d) or the Control pad.
Color selection
Color management pointer
Move the pointer to a spot which you want to adjust the color of and then press the SELECT button. Color Selection window will appear as shown below.
Pointer
(red frame)
44