Adjusting The Air Shutters
SEALED BURNERS
1.Lift the maintop and prop it up (see page
2.Remove the control knobs.
3.Open the oven door and remove the three screws from the bottom of the manifold panel, then pull down slightly on the panel, and pull it away from the range.
MANIFOLD PANEL
KNOB
SCREWS
CONVENTIONAL BURNERS
1.Lift the maintop until the support rods lock.
2. Adjust the air shutter openings, as needed. Close the air shutter to decrease the amount of air to the flame. Open the air shutter to increase the amount of air to the flame.
4.Use a screwdriver blade, and adjust the air shutter, as needed. Close the air shutter to decrease the amount of air to the flame. Open the air shutter to increase the amount of air to the flame.
air shutter
venturi air shutter
3. Lower the maintop.
5.Replace the manifold panel and control knobs and lower the maintop.