REMOVING A SIDE PANEL
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic- ing unit.
Failure to do so could result in death or electri- cal shock.
NOTE: The range is shown in the illustration on the next page with the maintop and burners removed for clarity. Also, the right side panel is shown removed. The left side panel is removed in the same manner.
5.Remove the five screws that secure the side panel to the back of the range.
6.Remove the top screw from the upper console end cap.
CAUTION: When you work on the gas range, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful.
1.Pull the range away from the wall so that you can access the back.
2.Turn off the gas to the range and disconnect the power cord from the wall outlet.
3.Remove the grates from the maintop.
4.Lift the maintop and prop it up (use the proce- dure on page
7.Remove the two screws from the burner box that secure the side panel to the top of the range.
8.Remove the front control knobs.
9.Open the oven door and remove the three screws from the bottom of the manifold panel and remove the panel.
10.Pull the rear of the side panel away from the range, push the panel forward, and unhook the three tabs from the slots at the front of the side panel.
11.Replace the side panel. IMPORTANT REAS-
SEMBLY NOTE: When you install the side panel, position the top flange under the burner box.
12.Reassemble the range.
