REMOVING A CONVENTIONAL BURNER
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic- ing unit.
Failure to do so could result in death or electri- cal shock.
CAUTION: When you work on the gas range, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful.
1.Turn off the gas to the range and disconnect the power cord from the wall outlet.
2.Remove the grates from the maintop.
3.Lift the maintop until the support rods lock.
4.If installed, remove the shipping screw from the burner, then lift and unhook the burner from the burner bracket, and remove it from the range.
BURNER BRACKET
SHIPPING SCREWS
BURNER
5.Install the new burner (do not reinstall the shipping screw).
6.Reassemble the range.
