REMOVING THE MAINTOP Conventional Burner Models
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic- ing unit.
4.Slide the maintop to the left so that the hinge pin is free of the right hinge bracket, (see the inset), and to the right so that it is free of the left bracket, then remove the maintop.
MAINTOP
Failure to do so could result in death or electri- cal shock.
CAUTION: When you work on the gas range, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful.
1.Turn off the gas to the range and disconnect the power cord from the wall outlet.
2.Remove the grates from the maintop.
3.Lift the maintop as far as it will go and unsnap the support rods from the body sides.
HINGE PIN
MOUNTING
SCREW 
UPPER
ACCESS
PANEL
INSERT HINGE
PIN IN BRACKET
HOLE IN UPPER
ACCESS PANEL
UPPER
CONSOLE
HINGE
BRACKET
HINGE PIN
MAINTOP
5.Remove the hinge pins from the old maintop and mount them to the new one.
6.Install the new maintop.
