Cooking Products Service Manual
Original July, 1996 | 4321891 |
© 1996 Whirlpool Corporation | Page |
REMOVING THE OVEN DOOR GASKET
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic- ing unit.
Failure to do so could result in death or electri- cal shock.
CAUTION: When you work on the gas range, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful.
1.Turn off the gas to the range and disconnect the power cord from the wall outlet.
2.Open the oven door and pull the clips on the old fiberglass gasket out of the holes in the front of the oven, and install the new gasket in its place.
3.Close the oven door and check to make sure that the gasket seal is tight and even around the door.
FIBERGLASS
GASKET
SNAP CLIP
INTO HOLE
OVEN LINER
