6.Removing one orifice spud at a time, use a 3/8" combination wrench, and replace the four
Remove and replace the
orifice spudsorifice spuds with the same color spuds.
notches
#70 | #65 | gas | #65 | #68 |
black | brass | manifold | brass | nickel |
3.Remove the four burners from the burner support bracket and from over the gas valves. NOTE: If installed, remove the shipping screws from the burners before you remove them.
burner shipping screw
burner
gas valve
L.R. | L. F. | R. F. | R.R. |
7,500 BTU | 8,500 BTU | 8,500 BTU 6,500 BTU | |
7.Reassemble the range.
CONVENTIONAL BURNERS
1.Remove the grates from the burners.
2.Lift the maintop until the support rods lock .
4.Removing one orifice spud at a time, use a 3/8" combination wrench, and replace the natu- ral gas orifice spuds with the L.P. gas orifice spuds. NOTE: When you are finished, place the natural gas orifice spuds in a plastic bag, and store them in a safe place for possible future use. Also, keep the literature that was supplied with the orifice spuds, in the same bag.
orifice spuds | Remove and |
| |
| replace the |
| orifice spuds. |
| notches |
brass | brass | brass | brass |
| gas manifold |
| |
L.R. | L. F. | R. F. | R.R. |
9,500 BTU | 9,500 BTU | 9,500 BTU 9,500 BTU | |
5.Reassemble the range.
