Whirlpool SF360BEE W/N, SF395LEE Q/Z/B, TGS325E W, SF385PEE Q/Z, SF372BEE Q/Z Replace the motor

PROBLEM	POSSIBLE CAUSE	SOLUTION
Control knob will not turn.	Press in on the knob before turning.	If knob is still hard to turn, replace the
		gas valve.
The self-clean cycle will not operate.	A delay start time has been pro-	Wait for the start time to be reached.
	grammed.
	The cooling fan is not running.	Check the cooling fan wiring.
		Test the control panel shutdown switch.
		Replace the motor.
“PF” shows on the display.	There has been a power failure.	Reset the clock.
A failure code (E3, F1, etc.) is show-	Press the CANCEL/OFF keypad.	If the code does not disappear, refer
ing on the display.		to page 4-14, and identify the cause of
		the error message to help you correct
		the problem.
The keypads do not operate.	The Control Lock has been set.	Press and hold the Control Lock key-
		pad for 5-seconds to unlock the key-
		pads.
		The range is not properly grounded.

4-12