Cooking Products Service Manual
Original July, 1996 | 4321891 |
© 1996 Whirlpool Corporation | Page |
REMOVING THE OVEN TEMPERATURE SENSOR
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before servic- ing unit.
Failure to do so could result in death or electri- cal shock.
CAUTION: When you work on the gas range, be careful when handling the sheet metal parts. Sharp edges may be present, and you can cut yourself if you are not careful.
1.Pull the range away from the wall so that you can access the back.
2.Turn off the gas to the range and disconnect the power cord from the wall outlet.
3.From behind the range, remove the lower access cover.
OVEN
TEMPERATURE
SENSOR
LOWER ACCESS
COVER
4.Disconnect the wire harness from the old oven temperature sensor and remove the sensor from the range.
REAR PANEL
OF OVEN
MOUNTING
SCREWS
HARNESS
CONNECTOR
OVEN TEMPERATURE
SENSOR
SENSOR
CONNECTOR
5.Mount the new oven temperature sensor to the range and connect the wire harness.
6.Reassemble the range.
