D-265
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards Transponder Cards
D.5.15.3 Temperature Tab
The Temperature tab allows you to assign performance monitoring thresholds for the wavelength
converter module laser temperature.
D.5.15.4 Current Tab
The Current tab allows you to assign performance monitoring thresholds for the wavelength converter
module laser current levels.
Subrack ID Displays the identification number of the subrack containing the wavelength converter module.
Slot ID Displays the identification number of the slot containing the wavelength converter module.
Software Version Displays the version of the software.
BIOS Version Displays the version number of the BIOS.
Board Serial Number Displays the serial number of the board.
SCC Number Displays the version of the module serial communication controller (SCC).
Product Option Displays the product option. Displays “Not Available” if the TL1 Agent version is earlier than
version 2.1.
Hardware Version Displaysthe versionof thehardware. Displays “Not Available” if theTL1 Agent versionis earlier
than version 2.1.
Line Direction Shows the line direction for the wavelength converter module.
State Allows you to place the wavelength converter module in one of two states: In Service or Under
Maintenance.
PM Collection Status Allows you to enable or disable PM data collection for the wavelength converter module.
TableD-335 Field Descriptions for the Identification Tab (continued)
Field Description
TableD-336 Field Descriptions for the Temperature Tab
Field Description
Laser 1 Temperature
Value When the Update button is clicked, displays the current temperature of Laser 1.
Low Sets the low temperature threshold for Laser 1 (in degrees Celsius) and the alarm severity level.
High Sets the high temperature threshold for Laser 1 (in degrees Celsius) and the alarm severity level.
TableD-337 Field Descriptions for the Current Tab
Field Description
Laser 1 Current
Value When theUpdate button is clicked, displays the Laser 1 current of the module.
Degrade Sets the degrade threshold for Laser 1 current (in mA) and the alarm severity level.
Fail Sets the failure threshold for Laser 1 current (in mA) and the alarm severity level.