D-3
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards FC_MR-4 Card
D.1.1.3 Card Tab
The Card tab allows you to view and update card information.
Service State Overall availability of the entity. Values are:
•IS_NR—In Service–Normal.
•OOS_AU—Out of Service–Autonomous.
•OOS_MA—Out of Service–Management.
•OOS_AUMA—Out of Service–Autonomous and Management.
In addition, a secondary state providesadditional information about the statusof the entity.
Values for secondary state are:
•MEA—Mismatch of equipment due to invalid equipment insertion.
•UEQ—Unequipped. There is nothing in the slot.
•UAS—Unassigned.The entity does not exist, has not been created, or has been deleted.
•SWDL—Software download in progress.
•MT—Maintenance, as per the Admin State change.
•AINS—Automatic In Service.
•DSBLD—Traffic is disabled on the entity.
•LPBK—Port or connection has a loopback on it.
•FLT—Faultsecondary state. When an entity is faulted, an FLTstate is raised. Equipment
andports in FLT state should be cleared as they transition. Transition states are listed in
Table11-10 on page 11-15.
See Table11-10 on page 11-15 for the Service state/Secondary state possible values.
Note If the NE release does not support the Service state, this field showsN/A.
Equipment State Displays the equipment state of the card.
Alarm Profile Sets the alarm profile for the port. Check the Suppress Alarms check box to suppress all
alarms for this card and its port(s).
TableD-1 Field Descriptions for the Identification Tab (continued)
Field Description
TableD-2 Field Descriptions for the Card Tab
Field Description
Card Mode Select the card mode. It can be either of the following:
•Distance Extension (Cisco default)
•Line Rate Only
Current Bandwidth Usage Displays the current bandwidth utilization in terms of STS or VC-4 usage.