D-11
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards FMEC Cards
Note See Table1-20 on page 1-44 for descriptions of actions that can be performed using the buttons at the
bottom of the window.
D.2.4 Slot Properties—FMEC-E1-120NP
The Slot Properties pane displays information about the Cisco ONS 15454 SDH slot that is selected in
theNE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.
TheONS 15454 SDH FMEC-E1-120NP (Unprotected) card provides front-mount electrical connection
for 42 ITU-compliant, G.703 E-1 ports. With the FMEC E1-120NP card, each E1-42 port operates at
2.048 Mbps over a 120-ohm, balanced interface. Twenty-one interfaces are led through one common
Molex 96-pin LFH connector.
The ONS 15454 SDH FMEC E1-120PROA (1:3 Protect A) card provides front-mount electrical
connectionfor 42 ITU-compliant, G.703 E-1 ports. With the FMEC E1-120PROA card, each E1-42 port
operates at 2.048 Mbps overa 120-ohm, balanced interface. Twenty-one interfaces are led through one
common Molex 96-pin LFH connector.
The ONS 15454 SDH FMEC E1-120PROB (1:3 Protect B) card provides front-mount electrical
connectionfor 42 ITU-compliant, G.703 E-1 ports. With the FMEC E1-120PROB card, each E1-42 port
operates at 2.048 Mbps overa 120-ohm, balanced interface. Twenty-one interfaces are led through one
common Molex 96-pin LFH connector.
For the FMEC-E1-120NP module, the Slot Properties pane displays the following tabs: Module View,
Identification, and Info.

D.2.4.1 Module View Tab

TheModule View tab displays a graphic of the FMEC-E1-120NP that is installed in the slot. The number
of critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms
arealso displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box
is read-only and indicates whether all alarms are suppressed for the card and its port(s).

D.2.4.2 Identification Tab

The Identification tab allows you to view and update FMEC-E1-120NP identification information.
TableD-15 Field Descriptions for the Identification Tab
Field Description
Equipment Type Displays the equipment type the slot is provisioned for.
Actual Equipment Type Displays the actual card that is installed in the slot.
HW Part Number Displays the card part number that is printed on the top of the card.
Hardware Revision Displays the hardware revision number.
Serial Number Displays the card serial number that is unique to each card.
CLEI Code Displays the CLEI code.
Firmware Version Displays the revision number of the software used by the ASIC chip installed on the card.