Current Tab, 285 | Cisco Systems 78-17630-01 manual

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Transponder Cards

Table D-372 Field Descriptions for the Quality of Service Tab

Description

B1 Counters

Errored Seconds	Sets the high threshold for the number of B1 errored seconds (ES) and the alarm severity level.
	An errored second is a one-second period with one or more error blocks or at least one defect.

Severely Errored Seconds	Sets the high threshold for the number of B1 severely errored seconds (SES) and the alarm
	severity level. A severely errored second is a one-second period that contains at least 30 percent
	of errored blocks or at least one defect.

Background Block Errors	Sets the high threshold for the number of B1 background block errors (BBE) and the alarm
	severity level. An errored block is a block in which one or more bits are in error. A background
	block error is an errored block that does not occur as part of a severely errored second.

Unavailable Seconds	Sets the high threshold for the number of B1 unavailable seconds (UAS) and the alarm severity
	level. The detection of 10 consecutive SES begins a period of UAS. The 10 SES detected are
	part of the UAS. The ES and SES counters decrement by 10 seconds and the UAS counter
	increments by an equivalent number of seconds. A new period of available time begins at the
	onset of 10 consecutive non-SES events.

D.5.20.5 Current Tab

The Current tab allows you to assign performance monitoring thresholds for the wavelength converter module laser current levels.

Table D-373 Field Descriptions for the Current Tab

Description

Laser 1 Current

Value	When the Update button is clicked, displays the Laser 1 current of the module.

Degrade	Sets the degrade threshold for Laser 1 current (in mA) and the alarm severity level.

Fail	Sets the failure threshold for Laser 1 current (in mA) and the alarm severity level.

The Power tab allows you to assign performance monitoring thresholds for the wavelength converter module Laser 1 power levels.

Table D-374 Field Descriptions for the Power Tab

Description

Laser 1 Power

Value	When the Update button is clicked, displays the current power of Laser 1.

Low	Sets the low threshold for the laser power (in mW) and the alarm severity level.

High	Sets the high threshold for the laser power (in mW) and the alarm severity level.

	Cisco Transport Manager Release 7.2 User Guide
	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-285
78-17630-01		D-285