Appendix D Slot Property
Transponder Cards
Table
Field
Description
Input Power 1
Value | When the Update button is clicked, displays the current transponder input power (in dBm). |
|
|
Low | Sets the low threshold for the input power, in dBm, and the alarm severity level. |
|
|
High | Sets the high threshold for the input power, in dBm, and the alarm severity level. |
|
|
Fail | Sets the failure threshold for the input power, in dBm, and the alarm severity level. |
|
|
D.5.7.8 Output Power Tab
The Output Power tab allows you to assign thresholds and alarm severities for the transponder output power.
Table
Field
Description
Output Power 1
Value | When the Update button is clicked, displays the current transponder output power (in dBm). |
|
|
Low | Sets the low threshold for the output power, in dBm, and the alarm severity level. |
|
|
High | Sets the high threshold for the output power, in dBm, and the alarm severity level. |
|
|
Fail | Sets the failure threshold for the output power, in dBm, and the alarm severity level. |
|
|
D.5.7.9 Action Tab
The Action tab allows you to force the ONS 15808 optical output power.
Table
Field
Description
Output Power Setting
Force Optical Output Power
Allows you to activate the output power control mode on the FEC transponder and force the transponder to regulate the optical output power. An improper setting of the transponder output power level could affect either of the following:
•The equalization of the channel downstream from the optical line, the optical channel S/N in fiber, and at the end of the optical line.
•The optical channel power at the end of the optical line.
Note See Table
|
| Cisco Transport Manager Release 7.2 User Guide |
|
|
|
|
|
| |||
|
|
|
|
| |
|
|
|
|