Cisco Systems 78-17630-01 appendix Quality of Service Tab, 254

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Transponder Cards

Table D-315	Field Descriptions for the Identification Tab (continued)
Field		Description
Board Serial Number		Displays the serial number of the board.
SCC Number		Displays the SCC number.
Product Option		Displays the product option. Displays “Not Available” if the TL1 Agent version is earlier than
		version 2.1.
Hardware Version		Displays the version of the hardware. Displays “Not Available” if the TL1 Agent version is earlier
		than version 2.1.
Line Direction		Shows the line direction for the receive transponder.
State		Allows you to place the receive transponder in one of two states: In Service or Under Maintenance.
PM Collection Status		Allows you to enable or disable PM data collection for the receive transponder.

D.5.12.3 Quality of Service Tab

The Quality of Service tab allows you to assign thresholds and alarm severities for B1 counters. Click the 15 min radio button to assign thresholds for 15-minute collection increments. Click the 1 day radio button to assign thresholds for 24-hour collection increments.

Table D-316 Field Descriptions for the Quality of Service Tab

Field

Description

B1 Counters

Errored Seconds	Sets the high threshold for the number of B1 errored seconds (ES) and the alarm severity level.
	An errored second is a one-second period with one or more error blocks or at least one defect.
Severely Errored Seconds	Sets the high threshold for the number of B1 severely errored seconds (SES) and the alarm
	severity level. A severely errored second is a one-second period that contains at least 30 percent
	of errored blocks or at least one defect.
Background Block Errors	Sets the high threshold for the number of B1 background block errors (BBE) and the alarm
	severity level. An errored block is a block in which one or more bits are in error. A background
	block error is an errored block that does not occur as part of a severely errored second.
Unavailable Seconds	Sets the high threshold for the number of B1 unavailable seconds (UAS) and the alarm severity
	level. The detection of 10 consecutive SES begins a period of UAS. The 10 SES detected are
	part of the UAS. The ES and SES counters decrement by 10 seconds and the UAS counter
	increments by an equivalent number of seconds. A new period of available time begins at the
	onset of 10 consecutive non-SES events.

D.5.12.4 Current Tab

The Current tab allows you to assign performance monitoring thresholds for the receive transponder Laser 1 current levels.

Table D-317 Field Descriptions for the Current Tab

Field

Description

Laser 1 Current

Value

When the Update button is clicked, displays the Laser 1 current of the receive transponder.

	Cisco Transport Manager Release 7.2 User Guide
D-254	78-17630-01