Cisco Systems 78-17630-01 appendix Loopback Tab, 151

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Table D-155	Field Descriptions for the STS Tab (continued)
Field		Description
Customer ID		The user-defined customer ID number
Service ID		The user-defined service ID number

D.4.9.5 Loopback Tab

		The Loopback tab allows you to view and update OC48 LR 1550 loopback information.
Table D-156	Field Descriptions for the Loopback Tab
Field		Description
Port Number		Displays the port number.
Admin State		Displays the status of the line. The line can be In Service (IS), In Service–Auto In Service Soak
		(IS_AINS), Out of Service (OOS), or Out of Service–Maintenance (OOS_MT).
Loopback Type		Allows you to configure a port to terminal loopback (Inward) or Facility (Line), or clear the current
		loopback (none).
		Note The line state must be OOS_MT before you can configure the loopback type.
Service State		Overall availability of the entity. Values are:
		•	IS_NR—In Service–Normal.
		•	OOS_AU—Out of Service–Autonomous.
		•	OOS_MA—Out of Service–Management.
		• OOS_AUMA—Out of Service–Autonomous and Management.
		In addition, a secondary state provides additional information about the status of the entity. Values for
		secondary state are:
		• MEA—Mismatch of equipment due to invalid equipment insertion.
		• UEQ—Unequipped. There is nothing in the slot.
		• UAS—Unassigned. The entity does not exist, has not been created, or has been deleted.
		• SWDL—Software download in progress.
		• MT—Maintenance, as per the Admin State change.
		•	AINS—Automatic In Service.
		• DSBLD—Traffic is disabled on the entity.
		• LPBK—Port or connection has a loopback on it.
		• FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment and ports
			in FLT state should be cleared as they transition. Transition states are listed in Table 11-10 on page
			11-15.
		See Table 11-10 on page 11-15for the Service state/Secondary state possible values.
		Note If the NE release does not support the Service state, this field shows N/A.

D.4.9.6 Protection Tab

The Protection tab allows you to view and update OC48 LR 1550 protection group information.

	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-151