Cisco Systems 78-17630-01 appendix 139

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Table D-146	Field Descriptions for the Line Tab (continued)
Subfield		Description
PJSTSMon#		Sets the STS that will be used for pointer justification. If set to 0, no STS is monitored. Only one
		STS can be monitored on each OC-N port.
		• 0 (Cisco default)–3 (OC3, per port)
		• 0 (Cisco default)–12 (OC-12)
		• 0 (Cisco default)–48 (OC-48)
ProvidesSync		If checked, the card is provisioned as an NE timing reference.
EnableSyncMsg		Enables synchronization status messages (S1 byte), which allow the node to choose the best
		timing source.
Admin SSM		If the node does not receive an SSM signal, it defaults to STU (synchronization traceability
		unknown). Admin SSM allows you to override the STU value with one of the following:
		• PRS—Primary reference source (Stratum 1)
		•	STS2—Stratum 2
		•	TNC—Transit node clock
		•	STS3E—Stratum 3E
		•	STS3—Stratum 3
		•	SMC—SONET minimum clock
		•	ST4—Stratum 4
Send DoNotUse		When checked, sends a do not use (DUS) message on the S1 byte.
Admin State		Select the designation that drives whether an entity is in service or out of service. The Admin
		state is the driver for the Service state.

	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-139