Cisco Systems 78-17630-01 appendix Slot Properties-OC3 IR/STM1 SH, 121

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Table D-127 Field Descriptions for the Info Tab

Field

Description

Extended Manufacturing Information

Attribute

Value

Displays the nominal card specification.

Displays the value of the attribute.

Note See Table 1-20 on page 1-44for descriptions of actions that can be performed using the buttons at the bottom of the window.

D.4.6 Slot Properties—OC3 IR/STM1 SH 1310-8

The Slot Properties pane displays information about the Cisco ONS 15454 SONET or ONS 15454 SDH slot that is selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

The OC3 IR/STM1 SH 1310-8 card provides eight intermediate or short range SONET/SDH OC-3 ports compliant with ITU-T G.707, ITU-T G.957, and Telcordia GR-253-CORE. Each port operates at

155.52Mbps over a single-mode fiber span. The card supports VT and nonconcatenated or concatenated payloads at the STS-1 or STS-3c signal levels.

For the OC3 IR/STM1 SH 1310-8 module, the Slot Properties pane displays the following tabs: Module View, Identification, Line, STS, Loopback, Protection, Alarm Behavior, Auto Laser Shutdown, J1 Path Trace, and Info.

D.4.6.1 Module View Tab

		The Module View tab displays a graphic of the OC3 IR/STM1 SH 1310-8 that is installed in the slot.
		The number of critical, major, minor, and warning alarms for the module is displayed under Alarm
		Status. (Alarms are also displayed when you move the mouse pointer over the graphic.) The Suppress
		Alarms check box is read-only and indicates whether all alarms are suppressed for the card and its
		port(s). Right-clicking the graphic opens a shortcut menu that you can use to reset, delete, or change the
		card.
D.4.6.2 Identification Tab
		The Identification tab allows you to view and update OC3 IR/STM1 SH 1310-8 identification
		information.
Table D-128		Field Descriptions for the Identification Tab
	Field		Description
	Equipment Type		Displays the equipment type that the slot is provisioned for.
	Actual Equipment Type		Displays the actual card that is installed in the slot.
	Hardware Part Number		Displays the card part number that is printed on the top of the card.
	Hardware Revision		Displays the hardware revision number.
			Cisco Transport Manager Release 7.2 User Guide
	78-17630-01			D-121