D-40
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
Multirate Cards
–
If port 7 is used as an OC-12/STM-4, Ports 5, 6, and 8 are disabled.
–
If port 10 is used as an OC-12/STM-4, Ports 9, 11, and 12 are disabled.
–
Any port can be used as an OC-3/STM-1 as long as all of the above rules are followed.
•STS-192
–
Ports 1, 4, 7, and 10 are the only ports usable as OC-48/STM-16.
–
If port 4 is used as an OC-48/STM-16, Ports 2 and 3 are disabled.
–
If port 7 is used as an OC-48/STM-16, Ports 5, 6, and 8 are disabled.
–
If port 10 is used as an OC-48/STM-16, Ports 9, 11, and 12 are disabled.
–
If port 4 is used as an OC-12/STM-4, Ports 2 and 3 can be used as an OC-12/STM-4 or
OC-3/STM-1.
–
If port 7 is used as an OC-12/STM-4, Ports 5, 6, and 8 can be used as an OC-12/STM-4 or
OC-3/STM-1.
–
If Port 10 is as used as an OC-12/STM-4, Ports 9, 11, and 12 can be used as an OC-12/STM-4
or OC-3/STM-1.
–
If port 4 is used as an OC-3/STM-1, Ports 2 and 3 can be used as an OC-12/STM-4 or
OC-3/STM-1.
–
If port 7 is used as an OC-3/STM-1, Ports 5, 6, and 8 can be used as an OC-12/STM-4 or
OC-3/STM-1.
–
If port 10 is used as an OC-3/STM-1, Ports 9, 11, and 12 can be used as an OC-12/STM-4 or
OC-3/STM-1.
–
Anyport can be used as an OC-12/STM-4 or OC-3/STM-1, as long as all of the above rules are
followed.
Forthe MRC-12 card, the Slot Properties pane displays the following tabs: Module View, Identification,
Pluggable Provisioning, Line, STS, VC-4 (available only on the ONS 15454 SDH), Loopback,
Protection,Alarm Behavior, Transceiver, Auto Laser Shutdown, Section Trace,J1 Path Trace, and Info.
The tabs shown depend on the NE configuration.
D.3.2.1 Module View Tab
The Module View tab displays a graphic of the transponder that is installed in the slot. The number of
critical,major, minor, and warning alarms for the module is displayed under Alarm Status. (Moving the
mouse pointer over the graphic also displays the alarm counts.) Right-clicking the graphic opens a
shortcut menu that you can use to reset, delete, or change the card.
D.3.2.2 Identification Tab
The Identification tab allows you to view and update MRC-12 card identification information.
TableD-49 Field Descriptions for the Identification Tab
Field Description
Equipment Type Displays the equipment type that the slot is provisioned for.
Actual Equipment Type Displays the actual card that is installed in the slot.
Hardware Part Number Displays the card part number that is printed on the top of the card.