Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Note See Table 1-20 on page 1-44for descriptions of actions that can be performed using the buttons at the bottom of the window.

D.4.17 Slot Properties—STM-16 (ONS 15454 SDH)

The Slot Properties pane displays information about the Cisco ONS 15454 SDH slot that is selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

The OC48 IR/STM16 SH AS 1310 card provides one intermediate-range, ITU-T G.707, ITU-T

G.957-compliant, SDH STM-16 port per card. The interface operates at 2.488 Gbps over a single-mode fiber span. The card supports concatenated or nonconcatenated payloads at STM-1, STM-4, or STM-16 signal levels on a per-VC-4 basis.

For the STM-16 module, the Slot Properties pane displays the following tabs: Module View, Identification, Line, VC-4, Loopback, Protection, Alarm Behavior, Auto Laser Shutdown, and J1 Path Trace.

D.4.17.1 Module View Tab

 

 

 

 

The Module View tab displays a graphic of the STM-16 that is installed in the slot. The number of

 

 

 

 

critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms are

 

 

 

 

also displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box is

 

 

 

 

read-only and indicates whether all alarms are suppressed for the card and its port(s). Right-clicking the

 

 

 

 

graphic opens a shortcut menu that you can use to reset, delete, or change the card.

D.4.17.2 Identification Tab

 

 

 

 

The Identification tab allows you to view and update STM-16 identification information.

Table D-193

Field Descriptions for the Identification Tab

 

 

 

 

 

Field

 

Description

 

 

 

 

 

Equipment Type

 

Displays the equipment type the slot is provisioned for.

 

 

 

 

Actual Equipment Type

Displays the actual card that is installed in the slot.

 

 

 

 

HW Part Number

Displays the card part number that is printed on the top of the card.

 

 

 

 

Hardware Revision

Displays the hardware revision number.

 

 

 

 

 

Serial Number

 

Displays the card serial number that is unique to each card.

 

 

 

 

 

CLEI Code

 

Displays the CLEI code.

 

 

 

 

Firmware Version

Displays the revision number of the software used by the ASIC chip installed on the card.

 

 

 

 

 

Product ID

 

Displays a product ID string of 63 characters maximum. If the card does not support the product

 

 

 

 

 

ID, the field shows N/A.

 

 

 

 

 

Version ID

 

Displays a version ID string in the format “V99_.” The version ID always begins with a V and

 

 

 

 

 

ends with a space. If the card does not support the version ID, the field shows N/A.

 

 

 

 

 

Equipment State

 

Displays the equipment state of the card.

 

 

 

 

 

Alarm Profile

 

Sets the alarm profile for the port. Check the Suppress Alarms check box to suppress all alarms

 

 

 

 

 

for this card and its port(s).

 

 

 

 

 

 

 

 

Cisco Transport Manager Release 7.2 User Guide

 

 

 

 

D-176

 

 

 

78-17630-01

 

 

 

 

 

 

Page 176
Image 176
Cisco Systems 78-17630-01 appendix Slot Properties-STM-16 ONS 15454 SDH