Cisco Systems 78-17630-01 appendix 10 on

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Multirate Cards

Table D-40	Field Descriptions for the Ether Line Tab (continued)
Field		Description
Admin State		The port administration state. It can be:
		•	IS—In Service.
		• IS, AINS—Automatic In Service.
		• OOS, DSBLD—Out of Service, Disabled.
		• OOS, MT—Out of Service, Maintenance.
Service State		Overall availability of the entity. Values are:
		•	IS_NR—In Service–Normal.
		•	OOS_AU—Out of Service–Autonomous.
		•	OOS_MA—Out of Service–Management.
		• OOS_AUMA—Out of Service–Autonomous and Management.
		In addition, a secondary state provides additional information about the status of the entity. Values
		for secondary state are:
		• MEA—Mismatch of equipment due to invalid equipment insertion.
		• UEQ—Unequipped. There is nothing in the slot.
		• UAS—Unassigned. The entity does not exist, has not been created, or has been deleted.
		• SWDL—Software download in progress.
		• MT—Maintenance, as per the Admin State change.
		•	AINS—Automatic In Service.
		• DSBLD—Traffic is disabled on the entity.
		• LPBK—Port or connection has a loopback on it.
		• FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment and
			ports in FLT state should be cleared as they transition. Transition states are listed in
			Table 11-10 on page 11-15.
		See Table 11-10 on page 11-15for the Service state/Secondary state possible values.
		Note If the NE release does not support the Service state, this field shows N/A.
Link State		Displays the physical port state. Possible values are Up, Down, or Not Present.
Flow Control		Displays the negotiated flow control mode. Values are None, Symmetrical, and Asymmetrical.
Negotiation Status		Displays the result of the most-recent auto-negotiation. The type of flow control that was
		negotiated will be displayed.
Auto Negotiation		Allows you to enable the card to match the speed and duplex mode of a partner node.
Max Frame		Sets the maximum frame size.
Flow Control Low		Sets the low flow control buffer level.
Flow Control High		Sets the high flow control buffer level.

	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-33