Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Table D-187

Field Descriptions for the Line Tab (continued)

 

 

 

 

 

Field

 

Description

 

 

 

 

Service State

Displays the service state:

 

 

 

 

 

IS_NR—In Service–Normal.

 

 

 

 

 

OOS_AU—Out of Service–Autonomous.

 

 

 

 

 

OOS_MA—Out of Service–Management.

 

 

 

 

 

OOS_AUMA—Out of Service–Autonomous and Management.

 

 

 

 

 

In addition, a secondary state provides additional information about the status of the entity. Values

 

 

 

 

 

for secondary state are:

 

 

 

 

 

MEA—Mismatch of equipment due to invalid equipment insertion.

 

 

 

 

 

UEQ—Unequipped; there is nothing in the slot.

 

 

 

 

 

UAS—Unassigned; the entity does not exist, has not been created, or has been deleted.

 

 

 

 

 

SWDL—Software download in progress.

 

 

 

 

 

MT—Maintenance, as per the Admin State change.

 

 

 

 

 

AINS—Automatic in service.

 

 

 

 

 

DSBLD—Traffic is disabled on the entity.

 

 

 

 

 

LPBK—Port or connection has a loopback on it.

 

 

 

 

 

FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment and

 

 

 

 

 

 

ports in FLT state should be cleared as they transition. Transition states are listed in Table 11-10

 

 

 

 

 

 

on page 11-15.

 

 

 

 

 

See Table 11-10 on page 11-15for the Service state/Secondary state possible values.

 

 

 

 

 

Note If the NE does not support the Service State, this field shows N/A.

 

 

 

 

 

AINS Soak

 

Automatic in-service soak. The determination of duration left before the traffic/termination

 

 

 

 

 

transitions to IS state.

 

 

 

 

AINS Soak Count

Automatic in-service soak countdown. Displays the remaining time of valid input signal in hh:mm,

 

Down

 

after which the card becomes in service (IS) automatically.

 

 

 

 

MS-SPRing Ext. Byte

Select an alternate MS-SPRing byte.

 

 

 

 

 

 

 

Port

 

 

 

 

 

 

 

 

 

Port Number

 

Displays the port number.

 

 

 

 

 

Note The Port tab and fields apply only to release 5.0 and earlier NEs. This functionality does not

 

 

 

 

 

 

apply to release 6.0 NEs.

 

 

 

 

 

Interface

 

Displays the SDH interface.

 

 

 

 

 

Note The Port tab and fields apply only to release 5.0 and earlier NEs. This functionality does not

 

 

 

 

 

 

apply to release 6.0 NEs.

 

 

 

 

 

 

RS Threshold 15 Minutes

 

 

 

 

 

 

 

 

Port Number

 

The port number

 

 

 

 

 

ES-RS

 

Errored seconds–regenerator section

 

 

 

 

 

SEFS-RS

 

Severely errored framing seconds–regenerator section

 

 

 

 

 

EB-RS

 

Errored blocks–regenerator section

 

 

 

 

 

SES-RS

 

Severely errored seconds –regenerator section

 

 

 

 

 

 

 

 

 

 

Cisco Transport Manager Release 7.2 User Guide

 

 

 

 

 

D-172

 

 

 

 

78-17630-01

 

 

 

 

 

 

 

Page 172
Image 172
Cisco Systems 78-17630-01 appendix 172