Cisco Systems 78-17630-01 appendix Slot Properties-FMEC-DS-1/E1, Slot Properties-FMEC-DS-3/E3

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

FMEC Cards

D.2.1 Slot Properties—FMEC-DS-1/E1

The Slot Properties pane displays information about the Cisco ONS 15454 SDH slot that is selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

The ONS 15454 SDH FMEC-DS-1/E1 card provides front-mount electrical connection for 14 ITU-compliant, G.703 E-1 ports. With the FMEC-DS-1/E1 card, each E1-N-14 port operates at 2.048 Mbps over a 120-ohm, balanced cable through two 37-pin DB connectors.

For the FMEC DS-1/E1 module, the Slot Properties pane displays the following tabs: Module View and Identification.

D.2.1.1 Module View Tab

	The Module View tab displays a graphic of the FMEC DS-1/E1 that is installed in the slot. The number
	of critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms
	are also displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box
	is read-only and indicates whether all alarms are suppressed for the card and its port(s).
D.2.1.2 Identification Tab
	The Identification tab allows you to view and update FMEC DS-1/E1 identification information.
Table D-11	Field Descriptions for the Identification Tab
Field		Description
Equipment Type		Displays the equipment type the slot is provisioned for.
Actual Equipment Type		Displays the actual card that is installed in the slot.
HW Part Number		Displays the card part number that is printed on the top of the card.
Hardware Revision		Displays the hardware version number of the card.
Serial Number		Displays the card serial number that is unique to each card.
CLEI Code		Displays the CLEI code.
Firmware Version		Displays the revision number of the software used by the ASIC chip installed on the card.
Equipment State		Displays the equipment state of the card.
Alarm Profile		Sets the alarm profile for the port. Check the Suppress Alarms check box to suppress all alarms
		for this card and its port(s).

Note See Table 1-20 on page 1-44for descriptions of actions that can be performed using the buttons at the bottom of the window.

D.2.2 Slot Properties—FMEC-DS-3/E3

The Slot Properties pane displays information about the Cisco ONS 15454 SDH slot that is selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

Cisco Transport Manager Release 7.2 User Guide

D-8 78-17630-01