Cisco Systems 78-17630-01 appendix 114

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Table D-120			Field Descriptions for the Identification Tab (continued)
	Field			Description
	Hardware Part Number			Displays the card part number that is printed on the top of the card.
	Hardware Revision			Displays the hardware revision number.
	Serial Number			Displays the card serial number that is unique to each card.
	CLEI Code			Displays the CLEI code.
	Firmware Version			Displays the revision number of the software used by the ASIC chip installed on the card.
	Product ID			Displays a product ID string of 63 characters maximum. If the card does not support the
				product ID, the field shows N/A.
	Version ID			Displays a version ID string in the format “V99_.” The version ID always begins with a V and
				ends with a space. If the card does not support the version ID, the field shows N/A.
	Administration State			The port administration state. It can be:
				•	IS—In Service.
				• IS, AINS—Automatic In Service.
				• OOS, DSBLD—Out of Service, Disabled.
				• OOS, MT—Out of Service, Maintenance.
	Service State			Overall availability of the entity. Values are:
				•	IS_NR—In Service–Normal.
				•	OOS_AU—Out of Service–Autonomous.
				•	OOS_MA—Out of Service–Management.
				• OOS_AUMA—Out of Service–Autonomous and Management.
				In addition, a secondary state provides additional information about the status of the entity.
				Values for secondary state are:
				• MEA—Mismatch of equipment due to invalid equipment insertion.
				• UEQ—Unequipped. There is nothing in the slot.
				• UAS—Unassigned. The entity does not exist, has not been created, or has been deleted.
				• SWDL—Software download in progress.
				• MT—Maintenance, as per the Admin State change.
				•	AINS—Automatic In Service.
				• DSBLD—Traffic is disabled on the entity.
				• LPBK—Port or connection has a loopback on it.
				• FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment
					and ports in FLT state should be cleared as they transition. Transition states are listed in
					Table 11-10 on page 11-15.
				See Table 11-10 on page 11-15for the Service state/Secondary state possible values.
				Note If the NE release does not support the Service state, this field shows N/A.
	Equipment State			Displays the equipment state of the card.
	Alarm Profile			Sets the alarm profile for the port. Check the Suppress Alarms check box to suppress all
				alarms for this card and its port(s).
		Cisco Transport Manager Release 7.2 User Guide
	D-114				78-17630-01