Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Table D-145

Field Descriptions for the Identification Tab (continued)

 

 

 

Field

 

Description

 

 

 

Service State

 

Overall availability of the entity. Values are:

 

 

IS_NR—In Service–Normal.

 

 

OOS_AU—Out of Service–Autonomous.

 

 

OOS_MA—Out of Service–Management.

 

 

OOS_AUMA—Out of Service–Autonomous and Management.

 

 

In addition, a secondary state provides additional information about the status of the entity.

 

 

Values for secondary state are:

 

 

MEA—Mismatch of equipment due to invalid equipment insertion.

 

 

UEQ—Unequipped. There is nothing in the slot.

 

 

UAS—Unassigned. The entity does not exist, has not been created, or has been deleted.

 

 

SWDL—Software download in progress.

 

 

MT—Maintenance, as per the Admin State change.

 

 

AINS—Automatic In Service.

 

 

DSBLD—Traffic is disabled on the entity.

 

 

LPBK—Port or connection has a loopback on it.

 

 

FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment

 

 

 

and ports in FLT state should be cleared as they transition. Transition states are listed in

 

 

 

Table 11-10 on page 11-15.

 

 

See Table 11-10 on page 11-15for the Service state/Secondary state possible values.

 

 

Note If the NE release does not support the Service state, this field shows N/A.

 

 

 

Equipment State

 

Displays the equipment state of the card.

 

 

 

Alarm Profile

 

Sets the alarm profile for the port. Check the Suppress Alarms check box to suppress all

 

 

alarms for this card and its port(s).

 

 

 

 

D.4.8.3 Line Tab

 

 

 

 

The Line tab allows you to view and update OC48 IR 1310 optical line performance monitoring

 

 

 

 

information.

Table D-146

Field Descriptions for the Line Tab

 

 

 

 

 

Subfield

 

Description

 

 

 

 

 

 

Line Config

 

 

 

 

 

 

 

 

Port Number

 

Displays the optical port number.

 

 

 

 

 

Port Name

 

Allows you to enter the name of the optical port.

 

 

 

 

 

SD BER

 

Sets the signal degrade bit error rate.

 

 

 

 

 

SF BER

 

Sets the signal fail bit error rate.

 

 

 

 

 

Type

 

Defines the port as SONET or SDH.

 

 

 

 

 

 

 

 

 

 

Cisco Transport Manager Release 7.2 User Guide

 

 

 

 

 

D-138

 

 

78-17630-01

 

 

 

 

 

Page 138
Image 138
Cisco Systems 78-17630-01 appendix Line Tab, 138