D-14
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards
FMEC Cards
D.2.5.3 Info Tab
The Info tab allows you to view nominal operating values set during manufacturing for the
FMEC-STM1E 1:1 card.
Note See Table1-20 on page 1-44 for descriptions of actions that can be performed using the buttons at the
bottom of the window.
Service State Overall availability of the entity. Values are:
•IS_NR—In Service–Normal.
•OOS_AU—Out of Service–Autonomous.
•OOS_MA—Out of Service–Management.
•OOS_AUMA—Out of Service–Autonomous and Management.
In addition, a secondary state provides additional information about the status of the entity.
Values for secondary state are:
•MEA—Mismatch of equipment due to invalid equipment insertion.
•UEQ—Unequipped. There is nothing in the slot.
•UAS—Unassigned. The entity does not exist, has not been created, or has been deleted.
•SWDL—Software download in progress.
•MT—Maintenance, as per the Admin State change.
•AINS—Automatic In Service.
•DSBLD—Traffic is disabled on the entity.
•LPBK—Port or connection has a loopback on it.
•FLT—Faultsecondary state. When an entity is faulted, an FLT state is raised. Equipment
and ports in FLT state should be cleared as they transition. Transition states are listed in
Table11-10 on page 11-15.
See Table11-10 on page 11-15 for the Service state/Secondary state possible values.
Note If the NE release does not support the Service state, this field showsN/A.
Equipment State Displays the equipment state of the card.
Alarm Profile Sets the alarm profile for the port. Check theSuppress Alarms check box to suppress all
alarms for this card and its port(s).
TableD-17 Field Descriptions for the Identification Tab (continued)
Field Description
TableD-18 Field Descriptions for the Info Tab
Field Description
Extended Manufacturing Information
Attribute Displays the nominal card specification.
Value Displays the value of the attribute.