D-45
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards Multirate Cards
Admin SSM If the node does not receive an SSM signal, it defaults to STU (synchronization
traceabilityunknown). Admin SSM allows you to override the STU value with one of the
following:
•PRS—Primary reference source (Stratum 1)
•STS2—Stratum 2
•TNC—Transit node clock
•STS3E—Stratum 3E
•STS3—Stratum 3
•SMC—SONET minimum clock
•ST4—Stratum 4
Send <FF> DoNotUse When checked, sends a special do not use (DUS) (0xff) message on the S1 byte.
PJSTSMon# Sets the STS that will be used for pointer justification. If set to 0, no STS is monitored.
Only one STS can be monitored on each OC-N port.
•0 (Cisco default) - 3 (OC-3, per port)
•0 (Cisco default) - 12 (OC-12)
TableD-51 Field Descriptions for the Line Config Subtab (continued)
Field Description