Table D-84 | Field Descriptions for the Line Tab (continued) | |
| | | | |
| Field | | Description | |
| | | | |
| Service State | | Displays the service state: | |
| | | | | • | IS_NR—In Service–Normal. | |
| | | | | • | OOS_AU—Out of Service–Autonomous. | |
| | | | | • | OOS_MA—Out of Service–Management. | |
| | | | | • | OOS_AUMA—Out of Service–Autonomous and Management. | |
| | | | | In addition, a secondary state provides additional information about the status of the entity. Values for | |
| | | | | secondary state are: | |
| | | | | • | MEA—Mismatch of equipment due to invalid equipment insertion. | |
| | | | | • | UEQ—Unequipped; there is nothing in the slot. | |
| | | | | • | UAS—Unassigned; the entity does not exist, has not been created, or has been deleted. | |
| | | | | • | SWDL—Software download in progress. | |
| | | | | • | MT—Maintenance, as per the Admin State change. | |
| | | | | • | AINS—Automatic in service. | |
| | | | | • | DSBLD—Traffic is disabled on the entity. | |
| | | | | • | LPBK—Port or connection has a loopback on it. | |
| | | | | • | FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment and ports | |
| | | | | | in FLT state should be cleared as they transition. Transition states are listed in Table 11-10 on page | |
| | | | | | | |
| | | | | See Table 11-10 on page 11-15for the Service state/Secondary state possible values. | |
| | | | | Note If the NE does not support the Service State, this field shows N/A. | |
| | | | |
| AINS Soak | | Automatic in-service soak. The determination of duration left before the traffic/termination transitions | |
| | | | | to IS state. | |
| | | |
| AINS Soak Count | Automatic in-service soak countdown. Displays the remaining time of valid input signal in hh:mm, after | |
| Down | | which the card becomes in service (IS) automatically. | |
| | | | |
| Line Threshold 15 Minutes | | |
| | | | | |
| Near End | | | | |
| | | | |
| Port Number | | The optical port number | |
| | | | |
| ES-L | | Errored seconds–line | |
| | | | |
| SES-L | | Severely errored seconds–line | |
| | | | |
| CV-L | | Coding violations–line | |
| | | | |
| UAS-L | | Unavailable seconds–line | |
| | | | |
| FC-L | | Failure count–line | |
| | | | |
| PSC | | Protection switching count | |
| | | | |
| PSD | | Protection switching duration | |
| | | | |
| PSC-W | | Protection switching count–working | |
| | | | |
| PSD-W | | Protection switching duration–working | |
| | | | | |
| Far End | | | | |
| | | | |
| | | Cisco Transport Manager Release 7.2 User Guide | |
| | | |
| D-70 | | | | | 78-17630-01 | |
| | | | | |