Cisco Systems 78-17630-01 appendix 148

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

Table D-154		Field Descriptions for the Line Tab (continued)
	Subfield		Description
	Admin SSM		If the node does not receive an SSM signal, it defaults to STU (synchronization traceability
			unknown). Admin SSM allows you to override the STU value with one of the following:
			• PRS—Primary reference source (Stratum 1)
			•	STS2—Stratum 2
			•	TNC—Transit node clock
			•	STS3E—Stratum 3E
			•	STS3—Stratum 3
			•	SMC—SONET minimum clock
			•	ST4—Stratum 4
	Send <FF> DoNotUse		When checked, sends a special do not use (DUS) (0xff) message on the S1 byte.
	Line Threshold 15 Minutes
	Near End
	Port Number		The optical port number
	ES-L		Errored seconds–line
	SES-L		Severely errored seconds–line
	CV-L		Coding violations–line
	UAS-L		Unavailable seconds–line
	FC-L		Failure count–line
	PSC		Protection switching count—Near-end only
	PSD		Protection switching duration—Near-end only
	PSC-W		Protection switching count—working
	PSD-W		Protection switching duration—working
	PSC-S		Protection switching count—span
	PSD-S		Protection switching duration—span
	PSC-R		Protection switching count—ring
	PSD-R		Protection switching duration—ring
	Far End
	Port Number		The optical port number
	ES-L		Errored seconds–line
	SES-L		Severely errored seconds–line
	CV-L		Coding violations–line
	UAS-L		Unavailable seconds–line
	FC-L		Failure count–line
	Line Threshold 1 Day
	Near End
	Port Number		The optical port number
		Cisco Transport Manager Release 7.2 User Guide
	D-148			78-17630-01