
Appendix D Slot Property
Optical Cards
Table
Field | Description |
|
|
Version ID | Displays a version ID string in the format “V99_.” The version ID always begins with a V and |
| ends with a space. If the card does not support the version ID, the field shows N/A. |
|
|
Equipment State | Displays the equipment state of the card. |
|
|
Alarm Profile | Displays the alarm profile for the port. |
|
|
D.4.20.3 STM Line Tab
| The STM Line tab allows you to view and update | |
| information. | |
Table | Field Descriptions for the STM Line Tab | |
|
|
|
Field |
| Description |
|
|
|
Port Number |
| Displays the optical port number. |
|
|
|
Port Name |
| Allows you to enter an optical port name. |
|
|
|
ProvidesSync |
| If checked, the card is provisioned as an NE timing reference. |
|
|
|
EnableSyncMsg |
| Enables synchronization status messages (S1 byte), which allow the node to choose the best timing |
|
| source. |
|
|
|
Send DoNotUse |
| When checked, sends a DNS (do not use) message on the S1 byte. |
|
|
|
Admin State |
| Shows the administrative state of the port: In Service (IS) or Out of Service (OOS). |
|
|
|
D.4.20.4 VC-4 Config Tab
|
| The |
Table | Field Descriptions for the | |
|
|
|
Field |
| Description |
|
|
|
VC Number |
| Displays the VC number. |
|
|
|
IPPM Enabled |
| Check to enable intermediate path performance monitoring (IPPM) and uncheck to disable IPPM. |
|
|
|
XC Loopback |
| Indicates |
|
|
|
D.4.20.5 Loopback Tab
|
| The Loopback tab allows you to view and update |
Table | Field Descriptions for the Loopback Tab | |
|
|
|
Field |
| Description |
|
|
|
Port Number |
| Displays the port number. |
|
|
|
| Cisco Transport Manager Release 7.2 User Guide |
|