Cisco Systems 78-17630-01 appendix Slot Properties-RXT, 244

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Transponder Cards

D.5.9 Slot Properties—RXT

The Slot Properties pane displays information about the Cisco ONS 15800 or ONS 15801 module that is installed in the slot selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

Cisco ONS 15800 and ONS 15801 Receive Transponder (RXT) modules are used in Cisco ONS 15800 and ONS 15801 terminal sites to retime, reshape, and regenerate low input demultiplexed signals.

A block diagram is shown in the following figure.

Figure D-15 Cisco ONS 15800 or ONS 15801 Receive Transponder

RXT modules shown on this sheet include:

•Receive Transponder–Directly Modulated–Normal module (RXT-DM-N)

•Receive Transponder–622 Mbps–Normal module (RXT-622-N)

For these RXT modules, the Slot Properties pane displays the following tabs: Module View,

Identification, Current, Power, Input Power, and Output Power.

D.5.9.1 Module View Tab

The Module View tab displays a graphic of the transponder that is installed in the slot. The number of critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Moving the mouse cursor over the graphic also displays the alarm counts.) The module status is displayed under Operational State. Right-clicking the graphic opens a shortcut menu that you can use to display the module in the Equipment Inventory Table, in the Alarm Browser, or in the RXT PM Table.

D.5.9.2 Identification Tab

		The Identification tab allows you to view and update receive transponder identification information.
Table D-299		Field Descriptions for the Identification Tab
	Field		Description
	NE ID		Displays the user-defined name of the NE where the receive transponder is installed.
	Description		Displays information that a user has entered (if any) to describe the NE.
	NE Model		Identifies the model of the selected NE (ONS 15800 or ONS 15801) where the receive transponder is
			installed.
	Rack ID		Displays the identification number of the rack where the subrack containing the receive transponder
			is installed.
	Subrack ID		Displays the identification number of the subrack containing the receive transponder.
		Cisco Transport Manager Release 7.2 User Guide
	D-244	78-17630-01