Cisco Systems 78-17630-01 appendix Module View Tab, Identification Tab

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

FC_MR-4 Card

•Two contiguously concatenated (CCAT) STS-24c/VC4-8c circuits

•One STS-48c/VC4-16c CCAT

•Two virtually concatenated (VCAT) circuits (STC3c-8V/VC4-8v) compliant with ITU-T G.7041 GFP-T and Telcordia GR-253-CORE

•One STS-24c/VC4-8c CCAT and one STS-24c/VC4-8c VCAT

For the FC_MR module, the Slot Properties pane displays the following tabs: Module View, Identification, Card, Port, Alarm Behavior, RMON Thresholds, J1 Path Trace, GBIC Inventory, and Info.

D.1.1.1 Module View Tab

The Module View tab displays a graphic of the FC_MR that is installed in the slot. The number of critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms are also displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box is read-only and indicates whether all alarms are suppressed for the card and its port(s).

Right-clicking the graphic opens a shortcut menu that you can use to reset, delete, or change the card.

D.1.1.2 Identification Tab

		The Identification tab allows you to view and update FC_MR identification information.
Table D-1	Field Descriptions for the Identification Tab
Field			Description
Equipment Type			Displays the equipment type the slot is provisioned for.
Actual Equipment			Displays the actual card that is installed in the slot.
HW Part Number			Displays the card part number that is printed on the top of the card.
Hardware Revision			Displays the hardware revision number.
Serial Number			Displays the card serial number that is unique to each card.
CLEI Code			Displays the CLEI code.
Firmware Version			Displays the revision number of the software used by the ASIC chip installed on the card.
Product ID			Displays a product ID string of 63 characters maximum. If the card does not support the
			product ID, the field shows N/A.
Version ID			Displays a version ID string in the format “V99_.” The version ID always begins with a V
			and ends with a space. If the card does not support the version ID, the field shows N/A.
Administration State			The port administration state. It can be:
			• IS—In Service.
			• IS, AINS—Automatic In Service.
			• OOS, DSBLD—Out of Service, Disabled.
			• OOS, MT—Out of Service, Maintenance.

Cisco Transport Manager Release 7.2 User Guide

D-2 78-17630-01