Cisco Systems 78-17630-01 Slot Properties-STM-16 ONS 15600 SDH, 17.9 J1 Path Trace Tab, 181

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

D.4.17.8 Auto Laser Shutdown Tab

		The Auto Laser Shutdown tab allows you to view and update ALS parameters.
Table D-199	Field Descriptions for the Auto Laser Shutdown Tab
Field			Description
Port No.			Displays the port number.
ALS Mode			Displays the auto laser shutdown mode (Disabled, Auto Restart, Manual Restart, or Manual Restart
			for Test).
Rec. Pulse Dur. (sec)			Allows you to set the received laser pulse duration, in seconds. The range is 2.0 to 100.0 seconds.
Rec. Pulse Int. (sec)			Allows you to set the received laser pulse interval, in seconds. The range is 60 to 300 seconds.
Status			Displays the current laser status. Values are Shutdown or Not Shutdown.
Request Restart			If selected, it allows you to request a laser restart. This parameter is configurable only when the ALS
			mode is set to Manual Restart or Manual Restart for Test and when the laser status is Shut Down.

D.4.17.9 J1 Path Trace Tab

	The J1 Path Trace tab allows you to view and retrieve STM-16 J1 path trace information.
Table D-200	Field Descriptions for the J1 Path Trace Tab
Field		Description
Port Number		Displays the port number.
VC Number		Displays the VC number.
Expected String		Displays the current expected string.
Received String		Displays the current received string.
Mode		Displays the path trace mode (Off/None, Auto, or Manual).
C2		Represents a machine-generated J1/J2 payload label byte.
Mismatch		Indicates whether there is a mismatch in the C2 byte received.
Vcat Mem Num		Displays the virtual concatenation (VCAT) member number.

Note See Table 1-20 on page 1-44for descriptions of actions that can be performed using the buttons at the bottom of the window.

D.4.18 Slot Properties—STM-16 (ONS 15600 SDH)

The Slot Properties pane displays information about the Cisco ONS 15600 SDH slot that is selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

The STM-16 card provides 16 long-haul STM-16 ITU-T G.957 L-16.2 compliant signals. The ports operate at the ITU-T G.707 compliant 2488.32 Mbps rate over a single-mode fiber span. The card has four physical connector adapters with eight fibers per connector adapter. The card VC4 payloads and concatenated payloads at VC4, VC4-4c, VC4-8c, or VC4-16c signal levels.

	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-181