D-211
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards Optical Cards
D.4.23.6 Transceiver Tab
The Transceiver tab allows you to view and update STM-64 LR/LH 4 transceiver information.
TableD-235 Field Descriptions for the Loopback Tab
Field Description
Port Number Displays the port number.
Admin State Shows the administrative state of the port: In Service (IS), Out of Service–Disabled (OOS, DSBLD), or
Out of Service–Maintenance (OOS_MT).
Loopback Type Allows you to configure a port to terminal loopback (Inward) or Facility (Line), or clear the current
loopback (None).
Note The line state must be OOS_MT before you can configure the loopback type.
Service State Overall availability of the entity. Values are:
•IS_NR—In Service–Normal.
•OOS_AU—Out of Service–Autonomous.
•OOS_MA—Out of Service–Management.
•OOS_AUMA—Out of Service–Autonomous and Management.
In addition, a secondary state provides additional information about the status of the entity. Values for
secondary state are:
•MEA—Mismatch of equipment due to invalid equipment insertion.
•UEQ—Unequipped. There is nothing in the slot.
•UAS—Unassigned. The entity does not exist, has not been created, or has been deleted.
•SWDL—Software download in progress.
•MT—Maintenance, as per the Admin State change.
•AINS—Automatic In Service.
•DSBLD—Traffic is disabled on the entity.
•LPBK—Port or connection has a loopback on it.
•FLT—Fault secondary state. When an entity is faulted, an FLT state is raised. Equipment and ports
in FLT state should be cleared as they transition. Transition states are listed inTable 11-10 on page
11-15.
See Table11-10 on page 11-15 for the Service state/Secondary state possible values.
Note If the NE release does not support the Service state, this field showsN/A.
TableD-236 Field Descriptions for the Transceiver Tab
Field Description
Port No. Port No. Port number 1–14.
Non-normalized LBC (mA) The actual operating value of laser bias current (in mA) for the specified card port.
Non-normalized OPT (dBm) The actual operating valueof optical powertransmitted (in dBm) forthe specified cardport.
Non-normalized OPR (dBm) The actual operating value of optical power received (in dBm) for the specified card port.