D-65
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards Multirate Cards
D.3.2.14 J1 Path Trace Tab
The J1 Path Trace tab allows you to view and update J1 path trace information.
D.3.2.15 Info Tab
The Info tab allows you to view nominal operating values set during manufacturing for the MRC-12
card.
Note See Table1-20 on page 1-44 for descriptions of actions that can be performed using the buttons at the
bottom of the window.
TableD-80 Field Descriptions for the Section Trace Subtab
Field Description
Port Number Displays the port number.
Trace Mode The trace mode (Off/None or Manual).
Disable AIS/RDI on TIM-S Allows you to disable the Alarm Indication Signal (AIS) and the Remote Defect Indication
(RDI) when the path Trace Identifier Mismatch Section (TIM-S) alarm is detected.
Transmit Length Select a transmit length for the trace.
Current Transmit String Displays the current transmit string. The trail trace identifier is 64 bytes in length.
Current Expected String Displays the current expected string; sets a new expected string.
Current Received String Displays the current received string.
TableD-81 Field Descriptions for the J1 Path Trace Tab
Field Description
Port Number Displays the port number.
STS | VC-4 Number Displays the STS or VC-4 number.
Expected String Displays the current expected string.
Received String Displays the current received string.
Mode Displays the path trace mode (Off/None, Auto, or Manual).
C2 Represents a machine-generated J1/J2 payload label byte.
TableD-82 Field Descriptions for the Info Tab
Field Description
Extended Manufacturing Information
Attribute Displays the nominal card specification.
Value Displays the value of the attribute.