Cisco Systems 78-17630-01 appendix Module View Tab, 169

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

D.4.15.1 Module View Tab

	The Module View tab displays a graphic of the S1.1-2-LC/E1-21 that is installed in the slot. The number
	of critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms
	are also displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box
	is read-only and indicates whether all alarms are suppressed for the card and its port(s).
D.4.15.2 Identification Tab
	The Identification tab allows you to view and update S1.1-2-LC/E1-21 identification information.
Table D-183	Field Descriptions for the Identification Tab
Field		Description
Equipment Type		Displays the equipment type the slot is provisioned for.
Actual Equipment Type		Displays the actual card that is installed in the slot.
HW Part Number		Displays the card part number that is printed on the top of the card.
Hardware Revision		Displays the hardware version number of the card.
Serial Number		Displays the card serial number that is unique to each card.
CLEI Code		Displays the CLEI code.
Firmware Version		Displays the revision number of the software used by the ASIC chip installed on the card.
Product ID		Displays a product ID string of 63 characters maximum. If the card does not support the product
		ID, the field shows N/A.
Version ID		Displays a version ID string in the format “V99_.” The version ID always begins with a V and
		ends with a space. If the card does not support the version ID, the field shows N/A.
Equipment State		Displays the equipment state of the card.
Alarm Profile		Displays the alarm profile for the port.
Suppress Alarms		If checked, all alarms are suppressed for the port.

D.4.15.3 STM Line Tab

		The STM Line tab allows you to view and update S1.1-2-LC/E1-21 optical line performance monitoring
		information.
Table D-184		Field Descriptions for the Line Tab
	Field		Description
	Port Number		Displays the optical port number.
	Port Name		Allows you to enter an optical port name.
	ProvidesSync		If checked, the card is provisioned as an NE timing reference.
	EnableSyncMsg		Enables synchronization status messages (S1 byte), which allow the node to choose the best timing
			source.
	Send DoNotUse		When checked, sends a DNS (do not use) message on the S1 byte.
	Admin State		Shows the administrative state of the port: In Service (IS), or Out of Service (OOS).
			Cisco Transport Manager Release 7.2 User Guide
	78-17630-01			D-169