D-57
Cisco Transport Manager Release 7.2 User Guide
78-17630-01
AppendixD Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards Multirate Cards
D.3.2.5.8 Alarm Thresholds Subtab
The Alarm Thresholds subtab allows you to select the thresholds for the alarms.
D.3.2.6 STS Tab (ONS 15454 SONET)The STS tab allows you to view and update MRC-12 STS information. The STS tab contains the
following subtabs:
•D.3.2.6.1 STS Config Subtab, page D-57
•D.3.2.6.2 Path Thresh 15 Min Subtab, page D-58
•D.3.2.6.3 Path Thresh 1 Day Subtab, page D-58
•D.3.2.6.4 Customer Info Subtab, page D-59
D.3.2.6.1 STS Config Subtab
The STS Config subtab allows you to view and change the STS settings of the MRC-12 card.
ES-RS Displays the errored seconds–regenerator section
SES-RS Displays the severely errored seconds–regenerator section
UAS-RS Displays the unavailable seconds–regenerator section
OFS-RS Displays the out of framing seconds–regenerator section
TableD-65 Field Descriptions for the RS Thresh 1 Day Subtab (continued)
Field Description
TableD-66 Field Descriptions for the Alarm Thresholds Subtab
Field Description
Port No. Port number.
LBC-HIGH Laser bias current maximum.
LBC-LOW Laser bias current minimum.
OPT-HIGH Optical power transmitted maximum.
OPT-LOW Optical power transmitted minimum.
OPR-HIGH Optical power received maximum.
OPR-LOW Optical power received minimum.
Set OPR Setting theoptical powerreceived (OPR)establishes thereceived powerlevel as100 percent.If the
receiver power decreases, then the OPR percentage decreases to reflect the loss in receiver power.
For example, if the receiver power decreases 3 dBm, the OPR decreases 50 percent.
TableD-67 Field Descriptions for the STS Config Subtab
Field Description
STS Number Displays the synchronous transport signal number information.
IPPM Enabled Check to enable IPPM and uncheck to disable IPPM.
XC Loopback Displays the cross-connect loopback status.