Cisco Systems 78-17630-01 appendix Quality of Service Tab, 220

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Transponder Cards

Table D-251	Field Descriptions for the Identification Tab
Field		Description
NE ID		Displays the user-defined name of the NE where the transponder is installed.
Description		Displays information that a user has entered (if any) to describe the NE.
NE Model		Identifies the model of the selected NE (ONS 15800 or ONS 15801) where the transponder is
		installed.
Rack ID		Displays the identification number of the rack where the subrack containing the transponder is
		installed.
Subrack ID		Displays the identification number of the subrack.
Slot ID		Displays the identification number of the slot containing the transponder.
Software Version		Displays the version of the software running on the module.
BIOS Version		Displays the version number of the BIOS.
Board Serial Number		Displays the serial number of the board.
SCC Number		Displays the version of the module serial communication controller (SCC).
Product Option		Displays the product option. Displays “Not Available” if TL1 Agent version is earlier than
		version 2.1.
Hardware Version		Displays the version of the hardware. Displays “Not Available” if TL1 Agent version is earlier
		than version 2.1.
Line Direction		Shows the line direction for the transponder.
State		Allows you to place the transponder in one of two states: In Service or Under Maintenance.
PM Collection Status		Allows you to enable or disable PM data collection for the transponder.

D.5.2.3 Temperature Tab

The Temperature tab allows you to assign temperature-related thresholds and alarm severities for the transponder laser.

Table D-252 Field Descriptions for the Temperature Tab

Field	Description
Value	When the Update button is clicked, displays the current temperature of Laser 1.
Low	Sets the low temperature threshold (in degrees Celsius) and the alarm severity level.
High	Sets the high temperature threshold (in degrees Celsius) and the alarm severity level.

D.5.2.4 Quality of Service Tab

The Quality of Service tab allows you to assign thresholds and alarm severities for forward error correction (FEC) counters. Click the 15 min radio button to assign thresholds for 15-minute collection increments. Click the 1 day radio button to assign thresholds for 24-hour collection increments.

	Cisco Transport Manager Release 7.2 User Guide
D-220	78-17630-01