Cisco Systems 78-17630-01 appendix Identification Tab, 241

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Transponder Cards

Operational State. Right-clicking the graphic opens a shortcut menu that you can use to display the module in the Equipment Inventory Table, in the Alarm Browser, or in the Receiver Transponders PM Table.

D.5.8.2 Identification Tab

		The Identification tab allows you to view and update transponder identification information.
Table D-293	Field Descriptions for the Identification Tab
Field			Description
NE ID			Displays the user-defined name of the NE where the transponder is installed.
Description			Displays information that a user has entered (if any) to describe the NE.
NE Model			Identifies the model of the selected NE (ONS 15808) where the transponder is installed.
Rack ID			Displays the identification number of the rack where the subrack containing the transponder is
			installed.
Subrack ID			Displays the identification number of the subrack.
Slot ID			Displays the identification number of the slot containing the transponder.
Software Version			Displays the version of the software.
BIOS Version			Displays the version number of the BIOS.
Board Serial Number			Displays the serial number of the board.
SCC Number			Displays the version of the module serial communication controller (SCC).
Product Option			Displays the product option. Displays Not Available if TL1 Agent version is earlier than version
			2.1.
Hardware Version			Displays the version of the hardware. Displays Not Available if TL1 Agent version is earlier than
			version 2.1.
Line Direction			Shows the line direction for the transponder.
State			Allows you to place the transponder in one of two states: In Service or Under Maintenance.
PM Collection Status			Allows you to enable or disable PM collection for the transponder.

D.5.8.3 Quality of Service Tab

The Quality of Service tab allows you to assign thresholds and alarm severities for B1 and forward error correction (FEC) counters. Click the 15 min radio button to assign thresholds for 15-minute collection increments. Click the 1 day radio button to assign thresholds for 24-hour collection increments.

Table D-294 Field Descriptions for the Quality of Service Tab

Field

Description

B1 Counters

Errored Seconds	Sets the high threshold for the number of B1 errored seconds (ES) and the alarm severity level.
	An errored second is a one-second period with one or more error blocks or at least one defect.
Severely Errored Seconds	Sets the high threshold for the number of B1 severely errored seconds (SES) and the alarm
	severity level. A severely errored second is a one-second period that contains at least 30%
	errored blocks or at least one defect.
	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-241