Cisco Systems 78-17630-01 appendix Slot Properties-OC48 IR, 7.9 J1 Path Trace Tab, 136

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Optical Cards

D.4.7.9 J1 Path Trace Tab

	The J1 Path Trace tab allows you to view the OC48 J1 path trace information.
Table D-144	Field Descriptions for the J1 Path Trace Tab
Field		Description
Port Number		Displays the port number.
VC Number		Displays the VC number.
Expected String		Displays the current expected string.
Received String		Displays the current received string.
Mode		Displays the path trace mode (Off/None, Auto, or Manual).
C2		Represents a machine-generated J1/J2 payload label byte.
Mismatch		Indicates whether there is a mismatch in the C2 byte received.
Display		Click the Display button to view the circuit trace information. See 7.2.21.2 Viewing a J1 Path Trace
		from the NE Explorer, page 7-134for more information.
Retrieve		Click the Retrieve button to retrieve J1 path trace information.

Note See Table 1-20 on page 1-44for descriptions of actions that can be performed using the buttons at the bottom of the window.

D.4.8 Slot Properties—OC48 IR 1310

The Slot Properties pane displays information about the Cisco ONS 15327 or ONS 15454 slot that is selected in the NE Explorer tree. Use this properties pane to change the module performance monitoring thresholds.

The ONS 15454 Optical Connector (OC48 IR 1310) card provides one intermediate-range, Telcordia GR-253-CORE compliant SONET OC-48 port per card. Each port operates at 2.49 Gbps over a single-mode fiber span. The card supports VT, nonconcatenated, or concatenated payloads at STS-1, STS-3c, STS-6c, STS-12c, or STS-48c signal levels.

For the OC48 IR 1310 module, the Slot Properties pane displays the following tabs: Module View, Identification, Line, STS, Loopback, Protection, Alarm Behavior, Auto Laser Shutdown, and J1 Path Trace.

Note The OC48 any slot (AS) card supports J1 path trace, but the OC48 card does not.

D.4.8.1 Module View Tab

The Module View tab displays a graphic of the OC48 IR 1310 that is installed in the slot. The number of critical, major, minor, and warning alarms for the module is displayed under Alarm Status. (Alarms are also displayed when you move the mouse pointer over the graphic.) The Suppress Alarms check box is read-only and indicates whether all alarms are suppressed for the card and its port(s). Right-clicking the graphic opens a shortcut menu that you can use to reset, delete, or change the card.

	Cisco Transport Manager Release 7.2 User Guide
D-136	78-17630-01