Cisco Systems 78-17630-01 appendix Temperature Tab, 237

Appendix D Slot Property Information—FC_MR-4, FMEC, Multirate, Optical, and Transponder Cards

Transponder Cards

Table D-285	Field Descriptions for the Identification Tab (continued)
Field		Description
Software Version		Displays the version of the software.
BIOS Version		Displays the version number of the BIOS.
Board Serial Number		Displays the serial number of the board.
SCC Number		Displays the version of the module serial communication controller (SCC).
Product Option		Displays the product option. Displays Not Available if TL1 Agent version is earlier than version
		2.1.
Hardware Version		Displays the version of the hardware. Displays Not Available if TL1 Agent version is earlier than
		version 2.1.
Line Direction		Shows the line direction for the transponder.
State		Allows you to place the transponder in one of two states: In Service or Under Maintenance.
PM Collection Status		Allows you to enable or disable PM collection for the transponder.

D.5.7.3 Temperature Tab

The Temperature tab allows you to assign performance monitoring thresholds for the transponder operating temperature.

Table D-286 Field Descriptions for the Temperature Tab

Field

Description

Laser 1

Value	When the Update button is clicked, displays the current temperature of Laser 1 (in degrees Celsius).
Low	Sets the operating temperature low threshold, in degrees Celsius, and the alarm severity level.
High	Sets the operating temperature high threshold, in degrees Celsius, and the alarm severity level.

D.5.7.4 Quality of Service Tab

The Quality of Service tab allows you to assign thresholds and alarm severities for forward error correction (FEC) counters. Click the 15 min radio button to assign thresholds for 15-minute collection increments. Click the 1 day radio button to assign thresholds for 24-hour collection increments.

Table D-287 Field Descriptions for the Quality of Service Tab

Field

Description

FEC Counters

Errored Seconds	Sets the high threshold for the number of FEC errored seconds (ES) and the alarm severity
	level. An errored second is a one-second period with one or more error blocks or at least one
	defect.
Severely Errored Seconds	Sets the high threshold for the number of FEC severely errored seconds (SES) and the alarm
	severity level. A severely errored second is a one-second period that contains at least 30%
	errored blocks or at least one defect.

	Cisco Transport Manager Release 7.2 User Guide
78-17630-01		D-237