Operation Function

9-15) Load Operation Check Function

1)In the normal operation, press Power Freeze(Quick Ice) and Power Cool buttons simultaneously for 6 second, then the display panel will blink for 2 seconds.

2)Press Fridge Temp. button to get into this check mode with an audible tone.

3)Each illuminating LED segment stands for the component which has an ouput signal from the control board.

4)This mode will terminate automatically after 30 seconds.

Table of Load Mode Check List

NO

Contents

 

 

 

R-FAN High or AC motor operation

 

 

 

R-FAN Low

R-DEF heater

 

Start mode

Overload mode

Low-temperature mode

Exhibition mode

COMP

F-FAN High

F-FAN Low

F-DEF-Heater

C-FAN High

C-FAN Low

Dispenser-Heater

Damper

-

Normal condition

For the R-FAN, only one rpm is applied for the current models, so that and show R-FAN operation only.

The F-FAN and C-FAN are operated to High/Low rpm automatically according to the operational condition.

④⑤ and only explain the system operation status according to the ambient condition

9-16) Restoration Function for Power Outage

1)When the freezer temperature is lower than 41, all functions on the display panel will be restored.

2)When the freezer temperature is higher than 41, all functions will be initialized. (-4for the freezer, 38for the refrigerator, and Cubed for the Ice Type)

9-17) Set Point Shift Function

Press Freezer Temp. and Power Cool buttons simultaneously for 12 seconds to get into this mode.

In this mode, only the display LEDs for temperature will be ON.

33

Page 33
Image 33
Samsung RS2666, RS2544 manual Load Operation Check Function, Restoration Function for Power Outage, Set Point Shift Function