Diagnostics

11-9) If the lamps of freezer / refrigerator does not light.

Caution!

1.When you are exchanging the lamp of freezer, please exchange or troubleshoot it with the power OFF to avoid an electric shock.

2.Please keep in mind you do not get burnt by the excessive heating of an incandescent light bulb.

Start

YES

Is the inside lamp filament cut?

How to check :

Separate the door S/W and measure its resistance with a measure. As the result, every Open/Close of the door S/W should turn 0/ , respectively.

NO

Does the F-door S/W have a normal contact?

NO

Exchange or troubleshoot the

inside lamp.

1)Where 0 alone comes out : Door S/W has Short trouble.

2)Where alone comes out : Door S/W has Open trouble.

YES

Exchange or troubleshoot the

 

 

door S/W

Check the connections of F and R-door S/W;

 

 

 

check and troubleshoot the inside lamp socket.

 

 

 

 

 

Reference

If the door is opened, then the contact of door S/W is opened and MICOM gets applied 5V to finally sense Open. If 5V has been sensed over two minutes afterwards, then an Door-Open alarm will sound ‘Ding-Dong’ for 10 seconds in a one-minute cycle. For that reason, if the door S/W has failure, the refrigerator can make a “Ding-Dong” sound per a one-minute cycle. Please note step for its service!

55

Page 55
Image 55
Samsung RS2777, RS2544, RS2666 manual If the lamps of freezer / refrigerator does not light, Is the inside lamp filament cut?